Home State Scientists Discover Oldest Known Nano-Structures In Ancient Artifacts In Tamil Nadu

Scientists Discover Oldest Known Nano-Structures In Ancient Artifacts In Tamil Nadu

25
0


Scientists have found the oldest identified human-made nano-materials in historical artifacts in Tamil Nadu

New Delhi:

Scientists have found the oldest identified human-made nano-materials within the “unique black coatings” of historical pottery shards – dated to 600 BC – unearthed from an archeological website in Keeladi, Tamil Nadu.

The analysis, printed lately within the journal Scientific Reports, revealed that these coatings are manufactured from carbon nanotubes (CNTs) which have enabled the layer to final greater than 2600 years, elevating questions on the instruments used throughout these durations to realize excessive temperatures for making earthenwares.

According to the scientists, together with these from the Vellore Institute of Technology (VIT) in Tamil Nadu, the coatings are “the oldest nano-structures observed till now.”

“Until this discovery, to our knowledge, the most ancient known nanostructures in human-made artifacts are from the eighth or ninth century AD,” research co-author Vijayanand Chandrasekaran from Vellore Institute of Technology informed information company Press Trust of India.

Carbon Nanotubes are tubular constructions of carbon atoms organized in an ordered method, Mr Chandrasekaran stated, including that coatings in historical artifacts could not often final this lengthy on account of put on and tear attributable to altering circumstances.

“But the robust mechanical properties of the CNT based coating has helped the layer sustain more than 2600 years,” he added.

Carbon nanotubes have superlative properties, together with excessive thermal and electrical conductivity, and really excessive mechanical power, defined nano-material scientist MM Shaijumon from IISER Thiruvananthapuram, who was unrelated to the research.

“But the people of this time may not have intentionally added CNTs, instead, during the processing at high temperatures, these would have just formed accidentally,” Shaijumon informed information company PTI.

“If there is some processing of the potteries, which probably would have involved some high-temperature treatment, then it will add more justification to the findings,” he added.

According to Mr Chandrasekaran, the closest scientific clarification for the discovering is that some “vegetal fluid or extract” might need been used within the coatings of those pots which can have led to the formation of CNTs throughout high-temperature processing.

Rajavelu S, Professor of History at Alagappa University in Tamil Nadu, who was unrelated to the research, informed information company PTI that the folks of this time could have added or coated one thing just like plant-sap to the within of the pots, and topic it to the almost 1100-1400 diploma Celsius high-temperature hearth therapy as seen in kilns.

“This fire treatment may have led to the formation of the coating which has likely strengthened the pot and made the coating durable,” Mr Rajavelu stated.

“Normally with high-temperature processing of carbon, they form these types of tubular nano-structures, but until about the 1990s there were no sophisticated instruments available to characterize them. So these structures are already even present in nature and only now we are observing them, “defined Mr Shaijumon.

Mr Rajavelu concurred.

He stated the traditional folks wouldn’t have identified these as CNTs, however could have simply had the necessity to make their pots have excessive sturdiness, “and may have needed a certain color out of their products on applying high-temperature firing.”

“They likely knew the technique to make these coatings practically, but may not have known this as a thesis with any kinds of formulae,” Mr Rajavelu added.

Commenting on the importance of the analysis, Sharada Srinivasan, an skilled in archaemetallurgy related to the National Institute of Advanced Studies (NIAS) in Bengaluru, stated nanotechnology has made strides because the 90s with the arrival of superior strategies just like the scanning tunnelling microscopy.

“But it is increasingly recognized from archaeological studies that past skilled artisans are sometimes accidentally or empirically made nano-materials – such as the famous Egyptian Blue – without being aware of the science of working at the nano-scale,” Ms Srinivasan informed Press Trust of India

Based on their evaluation, Mr Chandrasekaran stated the traditional Tamil civilization of this time have been conscious of, and mastered high-temperature processing, however added that the means and mechanism by which they produced these artifacts with carbon-nanotubes shouldn’t be broadly explored.

“Black and red pottery ware associated with megalithic sites in southern India continues into Keeladi dated back to 6th century BCE. The fine black and red effect was achieved by high temperature firing temperatures at about 1100 degrees in the presence of carbon-rich matter and iron -rich red soils, “Ms Srinivasan stated.

“They do not look like normal pots, these have glazed finishes, and are made of high-quality clay,” Mr Rajavelu added.

He stated these earthenwares have been seemingly utilized by the “sophisticated people of the time,” including that “a lot of the shards” have been present in Keeladi, “some dating back even as early as 900 BCE.”

“We have known for a long time that in iron smelting and manufacture, India was a world leader at the time. Even the Sangam ancient Tamil literature has noted about steel manufacture,” Mr Rajavelu stated.

“The technological skills of the Tamils ​​in high-temperature manipulation of carbonaceous matter to make ultra-high carbon crucible steel known as wootz by about the mid to late centuries BCE was also reported by us, while carbon nanotubes were reported in medieval patterned ‘Damascus ‘blades forged from such steel, “Ms Srinivasan defined.

She believes the findings increase the broader data of the historical past of science and expertise in India, and level to potential future functions of such nano-materials as sturdy coatings.

(Except for the headline, this story has not been edited by NDTV workers and is printed from a syndicated feed.)

.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here